EN

Digital Tube Welding Power Source

ZGD-315
Main Feature:
Adopt high performance industrial host as master control system
7-inch full-color touch screen system, supports English programming
The whole control system consists of control of all welding parameters
The system supports 32 sets of welding parameters, each group of parameters support maximum 8 partitions.
All welding parameters can be directly programmed through the touch screen.
Input Voltage/V
3 Phase, 380V±10%, 50Hz
Rated Input Current/A
15
Rated Input Capacity/KVA
9.3
Rated Input Power/KW9.1
Power Factor(COSФ)0.98
Welding Current Adjustment Range(A)5-315
Max Non-load Voltage(V)64
Power(%)≥85%
Duty Cycle(40℃)          
60%, 315A 22.6V
100%, 270A 20.8V
Dimension (mm)
480*800*1000
Weight (kg)85


1.The system uses high performance industrial host as master control system, has excellent motion control function and good response speed. The system uses 7-inch full-color touch screen system, supports English programming.
2.The whole control system consists of welding speed control, welding position control,wire feeding control, oscillation control, arc length tracking control, welding power source control, pneumatic positioning control, cooling water control, protective gas control, and remote control module. All system function submodule and hand controller are connected with main control system through Opencan bus, with good anti-interference and real-time communication function.
3.The welding head host power source based on DC servo system, has excellent intelligent PID speed closed loop and torque closed loop function, enable whole machine head has a good dynamic response ability.
4.The position control of the welding head is based on innovative magnetic encoder, which has excellent resolution and position memory ability.
5.Adopts imported welding power source as ontology,all welding parameters including pre gas supply time, delayed gas supply time, current rise time, peak,current, basic current, current decay time, wire feeding parameters, horizontal pendulum parameters, arc length control parameters can be set and adjusted.
6.The system supports 32 sets of welding parameters, each group of parameters support maximum 8 partitions. All welding parameters can be directly programmed through the touch screen, and can be saved with power off.
7.Optional welding process parameters and output printing function can meet engineering and installation digital control storage.

友情链接:    最可靠的买彩票平台   1号彩票-首页   彩票开户注册   好彩彩票_免费抢红包   下载app送18元彩金